Riders converting wheels to tubeless, or re-taping a rim, who want a roll with enough tape for several wheels.
This is tubeless rim tape for covering the rim bed and sealing the spoke holes of a tubeless wheel, so the tyre and sealant can hold air. The tape is 25 mm wide and 0.12 mm thick, and the roll is 10 metres long.
Ten metres is plenty for several wheels, so it suits a home workshop. The tape is yellow and sold as a universal tape for tubeless rims, so measure your rim's internal width first and choose a width that lies flat across the rim bed.
25 mm wide
A 25 mm width to cover the rim bed and spoke holes on rims that suit it.
Slim 0.12 mm tape
A thin tape that lies flat across the rim bed.
10 metre roll
Enough tape for several wheels from a single roll.
Rim tape
Great for
Maybe not for
25 mm wide, 0.12 mm thick and 10 m long. Measure your rim's internal width first: the tape should lie flat across the rim bed, cover every spoke hole and not climb the sidewalls.
Clean the rim, then wrap it snug
Clean the rim bed with a degreaser or alcohol first, so the adhesive has a clean surface to bond to. Start on the opposite side of the rim from the valve hole, keep the tape centred and pulled snug all the way round, and overlap the start by a few centimetres. Press it down firmly, then make a small clean cut for the valve.
