Riders refitting or replacing the hardware on a rear mesh basket mounted to a pannier rack.
Rear mesh baskets are clamped to the top of a pannier rack with a pair of flat bars that sit underneath the rack and bolt up through the basket floor. This spare bracket set replaces those fittings.
You get two black mounting bars plus the bolts and washers to fit them, which is often all that stands between a loose basket and a solid one.
It's a simple part, but a good one to have if you've moved a basket to a new bike or the old hardware has rusted solid.
Complete set
Two bars with bolts and washers.
Simple fit
Clamps the basket to the rack top.
Black finish
Blends in under the basket.
Kit
Great for
Maybe not for
Made as a spare set for rear mesh baskets. The bars sit under the rack top and bolt up through the basket floor, so check the hole spacing on your basket lines up before you ride.
Snug, then check again
Tighten the bolts evenly so the basket sits flat on the rack, then check them after the first couple of rides. Mesh baskets settle a little once loaded.
Add a washer inside
Use the washers on the basket side so the bolt heads can't pull through the mesh when it's loaded up.
