Riders who want a camera or light out in front of a 1 1/8 inch steerer without adding another clamp to the bars or stem.
This mount does two jobs: it is a headset spacer and a GoPro camera mount. The ring fits a 1 1/8 inch (28.6 mm) steerer in place of one 8 mm spacer, and the slotted arm carries a GoPro-style three-prong fitting 70 mm from the steerer centre, well clear of the stem.
It suits a bike with an 8 mm spacer under the stem that you are happy to swap, and a camera, light or computer that uses the GoPro fitting. The camera end takes the standard three-prong interface, so cameras and accessories with a GoPro-style base or adaptor should fit.
Replaces an 8 mm spacer
Takes the place of one 8 mm headset spacer on a 1 1/8 inch steerer.
70 mm reach
The GoPro fitting sits 70 mm from the steerer centre, out in front of the cockpit.
GoPro three-prong end
A standard three-prong fitting with a bolt, for GoPro-style cameras and mounts.
Slotted arm
A slotted arm runs from the ring to the camera end.
Fit
Camera end
Great for
Maybe not for
The ring is for a 1 1/8 inch (28.6 mm) steerer and is 8 mm tall, so it replaces one 8 mm spacer. Measure your steerer and check there is an 8 mm spacer to swap. The camera end sits 70 mm from the steerer centre.
Treat it like any other spacer
The ring sits in the spacer stack, so after fitting it reset the headset preload and tighten the stem bolts to the torque the stem maker gives. Then turn the bars lock to lock to check the camera or light clears the stem, bars and cables.
