Riders who carry or store a bike with the front wheel off and whose fork takes a 20 x 110 mm thru axle.
This fork mount holds a bike by the fork instead of the wheel. Take the front wheel off, sit the fork ends on the mount, then pass the bike's own 20 mm thru axle through the fork and the mount and tighten it as you would with the wheel fitted. It is made for forks with 110 mm spacing (20 x 110 mm), a standard found on many downhill forks.
The mount is black, with a flat foot on each side that has a mounting hole, and the mounting hardware is supplied. Bolt it to a solid, flat surface such as a vehicle floor or tray. You will need your bike's own 20 mm axle, so keep it with the bike.
Made for 20 mm thru axles
Sized for forks with a 20 mm thru axle and 110 mm hub spacing, the 20 x 110 mm standard.
Holds the fork, not the wheel
The front wheel comes off and the fork sits on the mount, so the bike takes up less room.
Mounting hardware supplied
Comes with mounting hardware for fixing the mount down.
Black finish
A black mount with a mounting hole in each flat foot.
Fit
Build
Great for
Maybe not for
Check your fork before ordering: this mount is for a 20 mm thru axle with 110 mm hub spacing (20 x 110 mm). Forks with a 15 mm axle, or 100 mm spacing, need a different mount.
The axle stays with the bike
This style of mount uses your bike's own thru axle to hold the fork, so the axle has to travel with the bike. Tighten it fully every time, and check the mounting bolts are snug before you drive off and again after the first stretch.
