Riders who carry or store a bike with the front wheel off and whose fork takes a 15 x 100 mm thru axle.
This fork mount holds a bike by the fork instead of the wheel. Take the front wheel off, sit the fork ends on the mount, then pass the bike's own 15 mm thru axle through the fork and the mount and tighten it as you would with the wheel fitted. It is made for forks with 100 mm spacing (15 x 100 mm).
The mount is black, with a flat foot on each side that has a mounting hole, and the mounting hardware is supplied. Bolt it to a solid, flat surface such as a vehicle floor or tray. You will need your bike's own 15 mm axle, so keep it with the bike.
Made for 15 mm thru axles
Sized for forks with a 15 mm thru axle and 100 mm hub spacing, the 15 x 100 mm standard.
Holds the fork, not the wheel
The front wheel comes off and the fork sits on the mount, so the bike takes up less room.
Mounting hardware supplied
Comes with mounting hardware for fixing the mount down.
Black finish
A black mount with a mounting hole in each flat foot.
Fit
Build
Great for
Maybe not for
Check your fork before ordering: this mount is for a 15 mm thru axle with 100 mm hub spacing (15 x 100 mm). Boost 15 x 110 mm forks and 20 mm axles need a different mount.
The axle stays with the bike
This style of mount uses your bike's own thru axle to hold the fork, so the axle has to travel with the bike. Tighten it fully every time, and check the mounting bolts are snug before you drive off and again after the first stretch.
