Riders and bike mechanics servicing a Campagnolo Ultra-Torque crankset whose bearings are worn.
The Campagnolo Ultra-Torque bearing and seal kit (FC-RE012) contains two steel bearings and two seals, enough for one crankset. Each bearing measures 25 mm inside, 37 mm outside and 6 mm wide.
Campagnolo's manuals tell you to have bearings replaced at a Campagnolo Service Center. The old bearings need an extractor to pull them without damaging the teeth of the joint, and the new ones need a press-fit tool to seat them. Confirm your crankset uses Ultra-Torque cups before you order.
Two bearings and two seals
A complete set for one crankset.
Steel bearings
The steel version of the Ultra-Torque bearing set.
25 x 37 x 6 mm size
The 6 mm wide 6805 size, narrower than a standard 7 mm 6805.
Made for Ultra-Torque
Made to fit Campagnolo Ultra-Torque bottom bracket cups.
Kit
Fitting
Great for
Maybe not for
One kit covers one crankset: two bearings, one per side, and two seals. The bearings are 25 mm inside, 37 mm outside and 6 mm wide. Check that your crankset uses Ultra-Torque cups before ordering.
A press job, not a hand job
Campagnolo's technical manuals say to take bearing replacement to a Campagnolo Service Center. For Ultra-Torque cranksets it calls for an extractor to pull the old bearings without damaging the teeth of the joint, and a press-fit tool to seat the new ones. If you do not have both, leave it to a mechanic who does.
