Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
ZEFAL · MTB shock pump
A straightforward analogue shock pump for accurate suspension setup at home or on the trail.
$79.99
PriceIn stock, ready to ship
If you want a dependable shock pump without the cost or fuss of a digital unit, the ZEFAL Z Shock is an easy pick. It gives you 360 psi capacity, a two-step connection to help avoid pressure loss, and a built-in gauge and bleed control so you can dial in forks and rear shocks with confidence.
Sold by Ashburton Cycles
Verified store
Price
$79.99
Max pressure
25 bar / 360 psi
Weight
235 g
Dimensions
5.50 x 29.50 x 9.50 cm
The ZEFAL Z Shock is built for riders who want to set up air suspension properly without overcomplicating things. It’s a dedicated MTB shock pump for forks and rear shocks, with a 25 bar / 360 psi maximum pressure that covers normal air-sprung trail, XC and enduro setups. The all-aluminium construction keeps it solid in the hand, while the Ø 40 mm integrated gauge makes pressure checks easier than the tiny inline dials found on some ultra-compact pumps.
What really makes this pump appealing is its two-stage connection. You seal the valve first, then open the shock, which helps reduce the pressure loss that can make suspension setup frustrating on cheaper designs. There’s also a pressure regulator / bleed valve for small adjustments, so it’s easier to creep up on the feel you want instead of overshooting and starting again.
Compared with many compact digital pumps, the Z Shock takes the analogue route: no battery to replace, no screen to knock about in a toolbox or pack, and no extra electronics if you simply want a reliable setup tool. It is heavier and bulkier than the smallest travel-focused shock pumps, but that trade-off brings a larger gauge, a sturdy body and a more workshop-friendly feel. For most riders setting sag at home or doing occasional trailside tweaks, that balance makes a lot of sense.
Ideal for mountain bikers and gravel riders with air suspension who want a durable, easy-to-read shock pump for regular setup and fine-tuning.
360 psi pressure range
Plenty of capacity for air forks and rear shocks, including higher-pressure setups that can push smaller pumps closer to their limits.
Two-step connection
Helps you attach the pump without dumping pressure, so your readings stay more consistent and setup is less fiddly.
Integrated analogue gauge
The large Ø 40 mm dial is easier to read than many tiny inline gauges, especially when you are making quick suspension changes.
Bleed valve for fine tuning
Lets you release pressure in small amounts so you can land on your target sag and ride feel more accurately.
All-aluminium build
The handle and barrel are aluminium, giving the pump a robust, workshop-ready feel with good long-term durability.
Universal suspension fit
Designed to work with all suspension forks and rear shocks, making it a practical one-pump solution for most air-sprung bikes.
Ergonomic handles
A more secure grip makes high-pressure pumping more comfortable when you are topping up forks or rear shocks.
Z-Shock: MTB shock pump.
Zéfal
Every detail as listed by the manufacturer.
ZEFAL is a French cycling accessory brand whose roots go back to 1880. The company’s history includes early links to the Presta valve, the launch of its first Zéfal pump in 1934, and the adoption of the ZEFAL name in 1998 after decades as Poutrait-Morin. Today, ZEFAL is based in Jargeau, France and produces a wide range of cycling accessories including pumps, hydration, luggage, mudguards and maintenance products. The brand emphasises French industrial know-how, says it manufactures as much as possible in France, and supports pump longevity with spare parts availability for many models.
ZEFAL · MTB shock pump
A straightforward analogue shock pump for accurate suspension setup at home or on the trail.
$79.99
In stockMax pressure
25 bar / 360 psi
Weight
235 g
Dimensions
5.50 x 29.50 x 9.50 cm
Gauge diameter
Ø 40 mm
If you want a dependable shock pump without the cost or fuss of a digital unit, the ZEFAL Z Shock is an easy pick. It gives you 360 psi capacity, a two-step connection to help avoid pressure loss, and a built-in gauge and bleed control so you can dial in forks and rear shocks with confidence.
The ZEFAL Z Shock is built for riders who want to set up air suspension properly without overcomplicating things. It’s a dedicated MTB shock pump for forks and rear shocks, with a 25 bar / 360 psi maximum pressure that covers normal air-sprung trail, XC and enduro setups. The all-aluminium construction keeps it solid in the hand, while the Ø 40 mm integrated gauge makes pressure checks easier than the tiny inline dials found on some ultra-compact pumps.
What really makes this pump appealing is its two-stage connection. You seal the valve first, then open the shock, which helps reduce the pressure loss that can make suspension setup frustrating on cheaper designs. There’s also a pressure regulator / bleed valve for small adjustments, so it’s easier to creep up on the feel you want instead of overshooting and starting again.
Compared with many compact digital pumps, the Z Shock takes the analogue route: no battery to replace, no screen to knock about in a toolbox or pack, and no extra electronics if you simply want a reliable setup tool. It is heavier and bulkier than the smallest travel-focused shock pumps, but that trade-off brings a larger gauge, a sturdy body and a more workshop-friendly feel. For most riders setting sag at home or doing occasional trailside tweaks, that balance makes a lot of sense.
Ideal for mountain bikers and gravel riders with air suspension who want a durable, easy-to-read shock pump for regular setup and fine-tuning.
360 psi pressure range
Plenty of capacity for air forks and rear shocks, including higher-pressure setups that can push smaller pumps closer to their limits.
Two-step connection
Helps you attach the pump without dumping pressure, so your readings stay more consistent and setup is less fiddly.
Integrated analogue gauge
The large Ø 40 mm dial is easier to read than many tiny inline gauges, especially when you are making quick suspension changes.
Bleed valve for fine tuning
Lets you release pressure in small amounts so you can land on your target sag and ride feel more accurately.
All-aluminium build
The handle and barrel are aluminium, giving the pump a robust, workshop-ready feel with good long-term durability.
Universal suspension fit
Designed to work with all suspension forks and rear shocks, making it a practical one-pump solution for most air-sprung bikes.
Ergonomic handles
A more secure grip makes high-pressure pumping more comfortable when you are topping up forks or rear shocks.
Z-Shock: MTB shock pump.
Zéfal