Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
SRAM · Hydraulic brake hose kit
Genuine SRAM hose for black-banjo road and MTB calipers.
$89.99
PriceIn stock, ready to ship
This is SRAM's own 2000mm replacement hose for brakes with a black banjo at the caliper, including Code, Level and monoblock road brakes. It comes with road and MTB fittings, cable holders and the T8 key you need for the barb.
Sold by Ashburton Cycles
Verified store
Price
$89.99
Length
2000mm
Caliper end
Black banjo
Fluid
DOT 4 or DOT 5.1
The SRAM Black Banjo hose kit replaces the brake line on SRAM hydraulic brakes that use a black banjo fitting at the caliper. SRAM lists it for Level ULT and TLM (A1), Code R, RS and RSC (B1), RED eTap HRD, S900 Monoblock and Code Stealth Ultimate, Silver and Bronze.
The 2000mm hose is long enough for a rear brake on most frames, and it is cut to length at the lever end. Both short road and long MTB compression nuts are included, along with barbs, olives, a caliper boot, external and stem-mounted cable holders and a T8 Torx key for fitting the barb.
Each kit does one brake, so order two if you are replacing front and rear. It runs DOT 4 or DOT 5.1 fluid only, and a bleed is needed after fitting.
Home mechanics and workshops replacing a damaged or too-short hose on a SRAM brake with a black banjo caliper fitting, or rerouting for a new frame.
Genuine SRAM
OE hose and fittings made for SRAM brakes.
Road and MTB fittings
Both compression nut lengths in the box.
2000mm length
Plenty for rear brakes and internal routing.
Complete kit
Barbs, olives, holders and T8 key included.
Every detail as listed by the manufacturer.
SRAM was founded in Chicago in 1987, starting out with its Grip Shift twist shifter before growing into one of the big three component makers. Today the SRAM family covers road, gravel and mountain drivetrains and brakes, plus RockShox suspension, Zipp wheels and TruVativ cranks and bottom brackets.
SRAM · Hydraulic brake hose kit
Genuine SRAM hose for black-banjo road and MTB calipers.
$89.99
In stockLength
2000mm
Caliper end
Black banjo
Fluid
DOT 4 or DOT 5.1
Covers
One brake
This is SRAM's own 2000mm replacement hose for brakes with a black banjo at the caliper, including Code, Level and monoblock road brakes. It comes with road and MTB fittings, cable holders and the T8 key you need for the barb.
The SRAM Black Banjo hose kit replaces the brake line on SRAM hydraulic brakes that use a black banjo fitting at the caliper. SRAM lists it for Level ULT and TLM (A1), Code R, RS and RSC (B1), RED eTap HRD, S900 Monoblock and Code Stealth Ultimate, Silver and Bronze.
The 2000mm hose is long enough for a rear brake on most frames, and it is cut to length at the lever end. Both short road and long MTB compression nuts are included, along with barbs, olives, a caliper boot, external and stem-mounted cable holders and a T8 Torx key for fitting the barb.
Each kit does one brake, so order two if you are replacing front and rear. It runs DOT 4 or DOT 5.1 fluid only, and a bleed is needed after fitting.
Home mechanics and workshops replacing a damaged or too-short hose on a SRAM brake with a black banjo caliper fitting, or rerouting for a new frame.
Genuine SRAM
OE hose and fittings made for SRAM brakes.
Road and MTB fittings
Both compression nut lengths in the box.
2000mm length
Plenty for rear brakes and internal routing.
Complete kit
Barbs, olives, holders and T8 key included.