Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
Generic · Car Rack Parts & Accessories
A front hub built around the 100 x 20 mm thru-axle standard.
$29.99
PriceIn stock, ready to ship
This front hub is intended for forks using a 100 mm x 20 mm thru-axle interface. It is a sensible replacement option where you need the correct hub spacing and axle diameter, but careful compatibility checking is essential because thru-axle standards vary between forks.
Sold by Ashburton Cycles
Verified store
Price
$29.99
Position
Front
Hub spacing
100 mm
Axle diameter
20 mm
This is a front hub for bikes using the 100 mm x 20 mm thru-axle format. A thru axle gives the wheel a defined position in the fork and can improve the stiffness of the hub-to-dropout interface, while also helping maintain consistent disc-brake rotor alignment.
Thru-axle compatibility is more detailed than width and diameter alone. Before ordering, check that your fork accepts a 100 mm x 20 mm front hub and confirm the required axle length, thread pitch, thread length and head interface. These details can vary between fork standards, so matching your existing axle or the fork manufacturer’s specification is the safest way to avoid a poor fit.
A practical choice for a customer replacing or building a front wheel for a fork specifically designed around the 100 mm x 20 mm thru-axle standard.
100 mm front spacing
Designed for forks using the 100 mm front hub width, helping you match the wheel to the correct fork standard.
20 mm thru-axle interface
Built around the larger 20 mm front thru-axle format rather than a quick-release or smaller thru-axle system.
Defined wheel positioning
A thru axle locates the hub in a specific position within the fork, supporting consistent wheel installation.
Stiffer interface
The thru-axle format can increase stiffness between the hub and fork dropouts compared with less substantial wheel-retention systems.
Disc-brake suitability check
Thru axles can help maintain the hub’s position relative to the brake caliper and rotor; confirm your complete fork and brake setup before purchase.
Measure before ordering
Check axle length, thread pitch, thread length and head interface as well as the 100 x 20 mm headline dimensions, since these details are not interchangeable across every fork.
Generic is a catalogue designation for products presented without a distinct store-brand identity. The term describes the retail classification rather than a separate manufacturer history or geographic origin. Generic-labelled products can still have clearly defined specifications, standards and compatibility requirements. For this component, the catalogue designation is retained while the fitment details identify the relevant road bottom bracket application.
Generic · Car Rack Parts & Accessories
A front hub built around the 100 x 20 mm thru-axle standard.
$29.99
In stockPosition
Front
Hub spacing
100 mm
Axle diameter
20 mm
Axle interface
Thru axle
This front hub is intended for forks using a 100 mm x 20 mm thru-axle interface. It is a sensible replacement option where you need the correct hub spacing and axle diameter, but careful compatibility checking is essential because thru-axle standards vary between forks.
This is a front hub for bikes using the 100 mm x 20 mm thru-axle format. A thru axle gives the wheel a defined position in the fork and can improve the stiffness of the hub-to-dropout interface, while also helping maintain consistent disc-brake rotor alignment.
Thru-axle compatibility is more detailed than width and diameter alone. Before ordering, check that your fork accepts a 100 mm x 20 mm front hub and confirm the required axle length, thread pitch, thread length and head interface. These details can vary between fork standards, so matching your existing axle or the fork manufacturer’s specification is the safest way to avoid a poor fit.
A practical choice for a customer replacing or building a front wheel for a fork specifically designed around the 100 mm x 20 mm thru-axle standard.
100 mm front spacing
Designed for forks using the 100 mm front hub width, helping you match the wheel to the correct fork standard.
20 mm thru-axle interface
Built around the larger 20 mm front thru-axle format rather than a quick-release or smaller thru-axle system.
Defined wheel positioning
A thru axle locates the hub in a specific position within the fork, supporting consistent wheel installation.
Stiffer interface
The thru-axle format can increase stiffness between the hub and fork dropouts compared with less substantial wheel-retention systems.
Disc-brake suitability check
Thru axles can help maintain the hub’s position relative to the brake caliper and rotor; confirm your complete fork and brake setup before purchase.
Measure before ordering
Check axle length, thread pitch, thread length and head interface as well as the 100 x 20 mm headline dimensions, since these details are not interchangeable across every fork.
Generic is a catalogue designation for products presented without a distinct store-brand identity. The term describes the retail classification rather than a separate manufacturer history or geographic origin. Generic-labelled products can still have clearly defined specifications, standards and compatibility requirements. For this component, the catalogue designation is retained while the fitment details identify the relevant road bottom bracket application.