Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
Shimano · E-TUBE Di2 electric wire (external routing)
Shimano's standard 650 mm E-TUBE Di2 wire for external routing.
$39.99
PriceIn stock, ready to ship
The Shimano EW-SD50 is the standard E-TUBE Di2 electric wire for external routing. This one is 650 mm long, with an SD50 plug at each end and a compact, waterproof connector.
Sold by Ashburton Cycles
Verified store
Price
$39.99
Length
650 mm
Routing
External (standard type)
System
E-TUBE (Di2)
This is a Shimano EW-SD50 electric wire at 650 mm, the standard type for external routing on E-TUBE Di2 systems. It carries power and signals between your Di2 components through a compact, waterproof connector, with an SD50 plug at each end.
Pick the length by tracing where the wire will run and allowing a little slack at each end. The cable is 2.8 mm thick and the plugs are 5.1 mm, and Shimano makes the EW-SD50 in lengths from 150 to 1,600 mm, so there is a wire to suit most frames and cockpits.
Riders and mechanics building or repairing an E-TUBE Di2 setup with SD50 ports who need a 650 mm external-routing wire.
650 mm length
Measure the route between your two Di2 ports and add a little slack to confirm that 650 mm is the right length.
Compact, waterproof connector
The connector is compact and waterproof, and it carries both power and interactive signals between components.
SD50 plugs at both ends
The plugs are 5.1 mm and the cable is 2.8 mm, so it fits SD50 ports.
External routing type
This is the standard EW-SD50. The EW-SD50-I is Shimano's separate internal-routing version with cable ties.
Every detail as listed by the manufacturer.
Shimano · E-TUBE Di2 electric wire (external routing)
Shimano's standard 650 mm E-TUBE Di2 wire for external routing.
$39.99
In stockLength
650 mm
Routing
External (standard type)
System
E-TUBE (Di2)
Connectors
SD50 plug at both ends
The Shimano EW-SD50 is the standard E-TUBE Di2 electric wire for external routing. This one is 650 mm long, with an SD50 plug at each end and a compact, waterproof connector.
This is a Shimano EW-SD50 electric wire at 650 mm, the standard type for external routing on E-TUBE Di2 systems. It carries power and signals between your Di2 components through a compact, waterproof connector, with an SD50 plug at each end.
Pick the length by tracing where the wire will run and allowing a little slack at each end. The cable is 2.8 mm thick and the plugs are 5.1 mm, and Shimano makes the EW-SD50 in lengths from 150 to 1,600 mm, so there is a wire to suit most frames and cockpits.
Riders and mechanics building or repairing an E-TUBE Di2 setup with SD50 ports who need a 650 mm external-routing wire.
650 mm length
Measure the route between your two Di2 ports and add a little slack to confirm that 650 mm is the right length.
Compact, waterproof connector
The connector is compact and waterproof, and it carries both power and interactive signals between components.
SD50 plugs at both ends
The plugs are 5.1 mm and the cable is 2.8 mm, so it fits SD50 ports.
External routing type
This is the standard EW-SD50. The EW-SD50-I is Shimano's separate internal-routing version with cable ties.