Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
Bicycle Parts Wholesale · Single sprockets
Fresh teeth for a back-pedal brake bike.
$19.99
PriceIn stock, ready to ship
A 19 tooth, 3/32 inch rear sprocket for coaster brake hubs, the kind found on many kids' bikes, cruisers and single speed city bikes. Swap it in when the old one is worn, hooked or bent.
Sold by Ashburton Cycles
Verified store
Price
$19.99
Teeth
19T
Chain
3/32 inch
Fits
Coaster brake hubs
Coaster brake hubs, the ones you stop by pedalling backwards, use a slip-on splined sprocket held on by a snap ring. This one has 19 teeth and is sized for 3/32 inch chain, as used on many kids' bikes, cruisers and single speed city bikes.
The three-lug centre locates on the hub driver, so it's a simple swap once the circlip is off. It's a handy fix for a worn sprocket that's skipping, or a way to fine-tune gearing on a single speed.
Fitting a new chain at the same time is always a good idea, as a worn chain will quickly wear out a new sprocket.
Anyone replacing a worn or damaged 19T sprocket on a coaster brake hub.
19 teeth
A common size on kids' and cruiser bikes.
3/32 inch
Suits narrower 3/32 inch chains.
Three-lug fit
Slides onto the hub driver and is held by a circlip.
Simple swap
Fix skipping or worn drive quickly.
Every detail as listed by the manufacturer.
Bicycle Parts Wholesale · Single sprockets
Fresh teeth for a back-pedal brake bike.
$19.99
In stockTeeth
19T
Chain
3/32 inch
Fits
Coaster brake hubs
Mount
3-lug splined
A 19 tooth, 3/32 inch rear sprocket for coaster brake hubs, the kind found on many kids' bikes, cruisers and single speed city bikes. Swap it in when the old one is worn, hooked or bent.
Coaster brake hubs, the ones you stop by pedalling backwards, use a slip-on splined sprocket held on by a snap ring. This one has 19 teeth and is sized for 3/32 inch chain, as used on many kids' bikes, cruisers and single speed city bikes.
The three-lug centre locates on the hub driver, so it's a simple swap once the circlip is off. It's a handy fix for a worn sprocket that's skipping, or a way to fine-tune gearing on a single speed.
Fitting a new chain at the same time is always a good idea, as a worn chain will quickly wear out a new sprocket.
Anyone replacing a worn or damaged 19T sprocket on a coaster brake hub.
19 teeth
A common size on kids' and cruiser bikes.
3/32 inch
Suits narrower 3/32 inch chains.
Three-lug fit
Slides onto the hub driver and is held by a circlip.
Simple swap
Fix skipping or worn drive quickly.