Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
VP · Bottom bracket
A JIS square-taper bottom bracket for threaded 68 mm shells.
Price set when listed
In stock, ready to ship
The VP VP-BC73 is a straightforward replacement bottom bracket for compatible cranksets, combining a boron-steel axle with sealed cartridge bearings. Check your shell width, thread standard and required spindle length before ordering.
Sold by Yellow Jersey stores
Verified store
BB width
68 mm
Spindle lengths
107 / 118 mm
Thread standard
BC1.37” × 24T
Crank interface
JIS taper
The VP VP-BC73 is a threaded bottom bracket with a JIS taper for compatible square-taper cranksets. Its 68 mm shell width and BC1.37” × 24T thread make it suitable for bikes using this traditional threaded standard, while the available 107 mm and 118 mm spindle lengths let you match the axle position to your crankset and frame setup.
Inside, sealed cartridge bearings keep the bearing unit contained for a clean, practical replacement solution. The axle uses boron steel, with cold-forged steel cups, phosphated cups and an anodised sheath for the specified construction and finish.
This model is listed as suitable for 8bar SUPER and SUPER Gravel cranksets. Before buying, confirm the crankset interface, bottom-bracket shell width, thread specification and spindle length; the correct spindle length is essential for proper chainline and crank clearance.
A practical choice for replacing a compatible JIS square-taper bottom bracket on a bike with a 68 mm threaded shell, including 8bar SUPER and SUPER Gravel cranksets.
JIS square-taper interface
Designed for cranksets using the JIS taper standard, helping you match the bottom bracket to the correct crank interface.
68 mm shell width
Specified for frames with a 68 mm bottom-bracket shell.
Two spindle lengths
Available in 107 mm and 118 mm options so you can select the length required by your crankset and setup.
Sealed cartridge bearings
A contained bearing design suited to straightforward bottom-bracket replacement.
Boron-steel axle
Uses a boron-steel axle as part of its durable steel construction.
Threaded standard
Uses the BC1.37” × 24T thread specification; check this against your frame before ordering.
8bar compatibility
Listed as suitable for 8bar SUPER and SUPER Gravel cranksets.
Bottom Bracket VP-BC73 Service on Triban 3 Red Road Bike (2/2)
Mango62uk
Every detail as listed by the manufacturer.
VP · Bottom bracket
A JIS square-taper bottom bracket for threaded 68 mm shells.
Price set when listed
In stockSold by Yellow Jersey stores
BB width
68 mm
Spindle lengths
107 / 118 mm
Thread standard
BC1.37” × 24T
Crank interface
JIS taper
The VP VP-BC73 is a straightforward replacement bottom bracket for compatible cranksets, combining a boron-steel axle with sealed cartridge bearings. Check your shell width, thread standard and required spindle length before ordering.
The VP VP-BC73 is a threaded bottom bracket with a JIS taper for compatible square-taper cranksets. Its 68 mm shell width and BC1.37” × 24T thread make it suitable for bikes using this traditional threaded standard, while the available 107 mm and 118 mm spindle lengths let you match the axle position to your crankset and frame setup.
Inside, sealed cartridge bearings keep the bearing unit contained for a clean, practical replacement solution. The axle uses boron steel, with cold-forged steel cups, phosphated cups and an anodised sheath for the specified construction and finish.
This model is listed as suitable for 8bar SUPER and SUPER Gravel cranksets. Before buying, confirm the crankset interface, bottom-bracket shell width, thread specification and spindle length; the correct spindle length is essential for proper chainline and crank clearance.
A practical choice for replacing a compatible JIS square-taper bottom bracket on a bike with a 68 mm threaded shell, including 8bar SUPER and SUPER Gravel cranksets.
JIS square-taper interface
Designed for cranksets using the JIS taper standard, helping you match the bottom bracket to the correct crank interface.
68 mm shell width
Specified for frames with a 68 mm bottom-bracket shell.
Two spindle lengths
Available in 107 mm and 118 mm options so you can select the length required by your crankset and setup.
Sealed cartridge bearings
A contained bearing design suited to straightforward bottom-bracket replacement.
Boron-steel axle
Uses a boron-steel axle as part of its durable steel construction.
Threaded standard
Uses the BC1.37” × 24T thread specification; check this against your frame before ordering.
8bar compatibility
Listed as suitable for 8bar SUPER and SUPER Gravel cranksets.
Bottom Bracket VP-BC73 Service on Triban 3 Red Road Bike (2/2)
Mango62uk