Buy from a store
Choose fulfilment, a variant and a store offer to checkout.
⌘K
1 / 6
ZEFAL · MTB shock pump
ZEFAL Z Shock
A straightforward analogue shock pump for accurate suspension setup at home or on the trail.
$79.99
PriceIn stock, ready to ship
If you want a dependable shock pump without the cost or fuss of a digital unit, the ZEFAL Z Shock is an easy pick. It gives you 360 psi capacity, a two-step connection to help avoid pressure loss, and a built-in gauge and bleed control so you can dial in forks and rear shocks with confidence.
Sold by Ashburton Cycles
Verified store
Escrow protectedBuyer ProtectionShips Australia-wide
Price
$79.99
Max pressure
25 bar / 360 psi
Weight
235 g
Dimensions
5.50 x 29.50 x 9.50 cm
Theproduct brief
01
The ZEFAL Z Shock is built for riders who want to set up air suspension properly without overcomplicating things. It’s a dedicated MTB shock pump for forks and rear shocks, with a 25 bar / 360 psi maximum pressure that covers normal air-sprung trail, XC and enduro setups. The all-aluminium construction keeps it solid in the hand, while the Ø 40 mm integrated gauge makes pressure checks easier than the tiny inline dials found on some ultra-compact pumps.
What really makes this pump appealing is its two-stage connection. You seal the valve first, then open the shock, which helps reduce the pressure loss that can make suspension setup frustrating on cheaper designs. There’s also a pressure regulator / bleed valve for small adjustments, so it’s easier to creep up on the feel you want instead of overshooting and starting again.
Compared with many compact digital pumps, the Z Shock takes the analogue route: no battery to replace, no screen to knock about in a toolbox or pack, and no extra electronics if you simply want a reliable setup tool. It is heavier and bulkier than the smallest travel-focused shock pumps, but that trade-off brings a larger gauge, a sturdy body and a more workshop-friendly feel. For most riders setting sag at home or doing occasional trailside tweaks, that balance makes a lot of sense.
Ideal for mountain bikers and gravel riders with air suspension who want a durable, easy-to-read shock pump for regular setup and fine-tuning.
360 psi pressure range
Plenty of capacity for air forks and rear shocks, including higher-pressure setups that can push smaller pumps closer to their limits.
Two-step connection
Helps you attach the pump without dumping pressure, so your readings stay more consistent and setup is less fiddly.
Integrated analogue gauge
The large Ø 40 mm dial is easier to read than many tiny inline gauges, especially when you are making quick suspension changes.
Bleed valve for fine tuning
Lets you release pressure in small amounts so you can land on your target sag and ride feel more accurately.
All-aluminium build
The handle and barrel are aluminium, giving the pump a robust, workshop-ready feel with good long-term durability.
Universal suspension fit
Designed to work with all suspension forks and rear shocks, making it a practical one-pump solution for most air-sprung bikes.
Ergonomic handles
A more secure grip makes high-pressure pumping more comfortable when you are topping up forks or rear shocks.
Ask anything about this product
Seeit in action
02
Z-Shock: MTB shock pump.
Zéfal
Fullspecifications
03
Every detail as listed by the manufacturer.
Product categoryMTB shock pump
DescriptionMini pump for forks and shocks
RRP€49.95 Tax included
Ref.0661
Handle materialAluminium
Barrel materialAluminium
ConstructionMade entirely of aluminium
Dimensions5.50 x 29.50 x 9.50 cm
Weight235 g
Gauge diameterØ 40 mm
Maximum pressure25 bar / 360 psi
UseFits all suspension fork and rear shocks
Two-stage operationAllows the valve to be sealed first and then the inner tube to be opened without the risk of pressure loss
Pressure gaugeIntegrated pressure gauge
Pressure adjustmentPressure regulator
HandlesErgonomic handles for a good grip
Step 1Make sure the red stop is unscrewed.
Step 2Screw the connection (silver screw) on the shock valve.
Step 3Screw the red stop to open the shock.
Step 4Inflate to the desired pressure.
Step 5Close the shock by unscrewing the red stop.
Step 6Push on the bleed valve to let the air out of the hose.
Step 7Unscrew the connection (silver screw 1) from the shock valve.
DesignProduct designed by our R&D department in France.
About ZEFAL
04
French cycling accessory brand with more than 140 years of history.
ZEFAL is a French cycling accessory brand whose roots go back to 1880. The company’s history includes early links to the Presta valve, the launch of its first Zéfal pump in 1934, and the adoption of the ZEFAL name in 1998 after decades as Poutrait-Morin. Today, ZEFAL is based in Jargeau, France and produces a wide range of cycling accessories including pumps, hydration, luggage, mudguards and maintenance products. The brand emphasises French industrial know-how, says it manufactures as much as possible in France, and supports pump longevity with spare parts availability for many models.
- French brand with history dating to 1880
- First Zéfal pump launched in 1934
- Head office and production site in Jargeau, France
- Known for pumps, bottles, mudguards and cycling accessories
1 / 6
ZEFAL · MTB shock pump
ZEFAL Z Shock
A straightforward analogue shock pump for accurate suspension setup at home or on the trail.
$79.99
In stockMax pressure
25 bar / 360 psi
Weight
235 g
Dimensions
5.50 x 29.50 x 9.50 cm
Gauge diameter
Ø 40 mm
If you want a dependable shock pump without the cost or fuss of a digital unit, the ZEFAL Z Shock is an easy pick. It gives you 360 psi capacity, a two-step connection to help avoid pressure loss, and a built-in gauge and bleed control so you can dial in forks and rear shocks with confidence.
The product brief
01The ZEFAL Z Shock is built for riders who want to set up air suspension properly without overcomplicating things. It’s a dedicated MTB shock pump for forks and rear shocks, with a 25 bar / 360 psi maximum pressure that covers normal air-sprung trail, XC and enduro setups. The all-aluminium construction keeps it solid in the hand, while the Ø 40 mm integrated gauge makes pressure checks easier than the tiny inline dials found on some ultra-compact pumps.
What really makes this pump appealing is its two-stage connection. You seal the valve first, then open the shock, which helps reduce the pressure loss that can make suspension setup frustrating on cheaper designs. There’s also a pressure regulator / bleed valve for small adjustments, so it’s easier to creep up on the feel you want instead of overshooting and starting again.
Compared with many compact digital pumps, the Z Shock takes the analogue route: no battery to replace, no screen to knock about in a toolbox or pack, and no extra electronics if you simply want a reliable setup tool. It is heavier and bulkier than the smallest travel-focused shock pumps, but that trade-off brings a larger gauge, a sturdy body and a more workshop-friendly feel. For most riders setting sag at home or doing occasional trailside tweaks, that balance makes a lot of sense.
Ideal for mountain bikers and gravel riders with air suspension who want a durable, easy-to-read shock pump for regular setup and fine-tuning.
360 psi pressure range
Plenty of capacity for air forks and rear shocks, including higher-pressure setups that can push smaller pumps closer to their limits.
Two-step connection
Helps you attach the pump without dumping pressure, so your readings stay more consistent and setup is less fiddly.
Integrated analogue gauge
The large Ø 40 mm dial is easier to read than many tiny inline gauges, especially when you are making quick suspension changes.
Bleed valve for fine tuning
Lets you release pressure in small amounts so you can land on your target sag and ride feel more accurately.
All-aluminium build
The handle and barrel are aluminium, giving the pump a robust, workshop-ready feel with good long-term durability.
Universal suspension fit
Designed to work with all suspension forks and rear shocks, making it a practical one-pump solution for most air-sprung bikes.
Ergonomic handles
A more secure grip makes high-pressure pumping more comfortable when you are topping up forks or rear shocks.
Ask anything about this product
Z-Shock: MTB shock pump.
Zéfal